Computer & Device Access
Twitch Switch
The Twitch Switch allows you to activate up to 3 switch adapted devices, or emulate a mouse or keyboard with movement as subtle as twitching your eyebrow.
USB Switch Tester
A DIY open source hardware device to test if an assistive switch is functional.
Spruce Mini Joystick
A small proportional analog joystick in a mountable enclosure that can be used for adapted gaming or computer access.
Switch Mounting Plate GoPro Compatible
A 3D printable mounting plate for mounting assistive switches. The plate has a mounting interface that is compatible with GoPro mounting accessories.
Redwood Joystick
An open source 3D printed enclosure for the Ultimarc Ultrastik Joystick and an adapter for different 3D printed toppers.
Raindrop Switch
A small, pressure-activated assistive switch
PVC Accessible Mounting System
A collection of readily available commercial-off-the-shelf components and 3D printed components that can be assembled into various configurations to provide mounting solutions for assistive technology.
MMC10
Neil Squire Society's Makers Making Change program is officially 10 years old!
Light Touch Switch
A slim, pressure activated assistive switch with a 3.5 mm connection.
Light Proximity Switch
An open-source assistive switch that is activated by movement or extremely light contact.
Lift Switch
A Switch Modifier that enables a switch to be activated when the switch is released rather than when pressed.
Inclusive Art Board for Low Vision
A 3D printable canvas with a grid of threaded holes and colored threaded pegs with tactile indicators for creating tactile graphics.
Felting Needle Holder
A 3D printed aid that makes it easier to hold and manipulate a felting needle.
Cedar Mini USB Joystick
A small proportional joystick that can be used as a mouse or gaming joystick. This joystick has a small range of motion and the joystick mode is compatible with the Xbox Adaptive Controller.
Adaptive Cue Rest
A 3D printable OpenAT device for supporting a cue when playing billiards or pool
arthritis door knob
A doorknob that does not require grasping. People who suffer from arthritis can have a difficult time using traditional door knobs, this is an attempt to improve that.
Key Turner
The Key Turner is a 3D printed assistive device designed to support people with arthritis and other disabilities in holding and operating their keys. This device is designed to accommodate different key sizes.
Big Open Switch
A 3D printable assistive switch with a diameter of 150 mm
Willow Joystick
A low-force OpenAT Joystick intended for people with disabilities for digital access and adapted gaming.
Trinkey Assistive Interface
A simple to build cost-effective assistive interface for digital access based on the Adafruit TRRS Trinkey.
Tube Opener
A 3D printable aid for opening tubes, like paint tubes.
Clothing Button Aid
A 3D printable aid for assisting those with limited strength and/or dexterity to fasten a button.
Touchpad Joystick
For gamers who need a low-force, external joystick for adaptive gaming, the Touchpad Joystick is a small, low-cost, touch-sensitive joystick that can be used with the Xbox Adaptive Controller.
Ivy Nunchuck Joystick Adapter
Open source adapter to use a Nunchuck Controller as a USB HID Mouse or USB HID Gamepad.